Sunday, 9. August 2009
Backsplash wall before.
- Backsplash wall after
Took another two days to replace the 1960’s contact paper on the shelves, clear out more stuff from the shelves, figure out a place for the microwave which turned out to be too big to fit under the cabinet left of the sink like I wanted to, but it fit on the right side of the sink, and a few other small things.
Moved a small 1960’s era table and two 1970’s era chairs from my back room (the junk room) to the kitchen, so now it is a proper eat-in kitchen complete with a walk-in pantry 
I think it will show a lot better when I list the house.
My dogs hate it. Before, I had a carpet runner between the back door and the archway to the living room. Now, it’s all clean, slick, shiny vinyl flooring… walking on it is no problem. But if they try to run on it to go scare some poor squirrel out of the backyard, barking all the way, they slip-and-slide and loose all grip on the flooring. It’s actually very funny… think a drunk trying to walk on a ice skating rink Poor pups!! It’s hysterical watching Binkie get halfway across the kitchen, then back up, and go through the living room, office, bathroom, and master bedroom, circling all the way around the house, to get out the back door! I keep telling him if he would just WALK instead of RUN across the floor, he could save himself some time! Coco’s like 15 years old, so she pretty much never runs… the floor doesn’t challenge her at all, yet she also walks around because she just doesn’t like the way it feels on her paws, best I can figure. Lassie the Cat isn’t real fond of it either… but Lassie almost never goes through the kitchen anyway, preferring to get out through my bedroom window Boy is he going to be pissed when I close that down for the winter!
Reminds me, that’s another thing to add to the “to do” list: Fix the doggie door, so it will securely latch.
Pantry wall before
Pantry wall after
All told, not including the break one weekend for another yard sale, it took eight days to get the kitchen into shape.
My total expenses were $69.72, for new electrical outlets and light switch, ice maker hookup and water line cap, white paint, PineSol (used the whole bottle!), contact paper, painter’s tape, and new door handle for the back door.
The “before” pictures, sigh…scary stuff…be afraid, be very afraid. The “after” photos I made using the very nifty featured called “Make Panoramic Photo” in Vista’s “Windows Live Photo Gallery” program. You take a bunch of different photos, and it will “stich” them together, to make a panoramic photo. It actually works quiet good, although some of the alignments are a bit off – honestly, my wall’s not split like it shows in a few of these. But I thought they gave a much better idea of the finished kitchen. Well, almost finished… I still have to clean the ceiling, mop & shine the floor, replace a light switch, a few minor things that I’m not worried about right this instance. Anyway, here they are, enjoy!
Orange wall, before.
Orange wall, after.
Posted in Life, Selling the House by Laura -
More articles about Remodeling the House
Saturday, 8. August 2009
These last few days have been spent dealing with the rest of the kitchen floor and finishing the pantry wall. Underneath where the refrigerator was, in front of the pantry door, the floor had buckled due to water damage caused by a mouse chewing through the water line to the ice maker about six years ago. Some water had seeped around the edges of the linoleum in the pantry at the time, causing water to get under the flooring. But I thought at the time that some judicious hole-drilling would minimize that problem, and by drilling holes, most if not all of that inter-floor-layer water would drain to the crawl space and out. Which, in fact, it did.
floor torn up, yuck
In and of itself, I wasn’t too worried about the buckling, either, since I thought it was just the linoleum flooring that had buckled, and knew over time it would eventually lay back down flat, especially with the heat of the refrigerator on top of it. Well, as I discovered, of course that didn’t happen. I cut into the 1980’s layer of linoleum, hoping I could just do some trimming of it to get it to lay flat then cover it up with the rest of the stick-on tiles I had from when I first covered the floor some eight years ago. Well, below the 1980’s layer is the 1970’s layer of linoleum, of which below that is a layer of thin plywood, sitting over the 1960’s layer of linoleum. (I swear every owner of this house has added a layer of flooring in the kitchen, myself included!) When the flood of water from the mouse-chewed water line seeped through those holes I drilled in an effort to avoid water spreading between the layers, desiring for it to just drain out, I inadvertently exposed that plywood to the water. It buckled. Bad. No quick cutting and splicing here, damn it. A few screws to “pull” it down to the subfloor won’t work, either.
By the way, the main reason I didn’t just pull the entire kitchen floor up when I recovered it eight years ago is simple: Linoleum flooring prior to the early 1980s contains asbestos. I already created a hazardous waste situation when I remodeled the bathroom nearly ten years ago. Back then, not knowing better, I actually pulled all five layers of flooring up in the bathroom, three layers of various linoleum, two subfloors, and a layer of 1950s Tri-Bond plastic tile (man did someone love that stuff … it was and still is all over this house!)… I’ll never forget the panic I caused my garbageman at the time when he saw a trash can full of asbestos-laden, broken-up, loosely piled ancient flooring in the can! (Never had a garbageman knock on my door, red-faced and hysterical, shouting at me, “What the hell are you doing!?!” Granted, he used a much stronger curse word than “hell”…) Somewhere around here I’ll have to dig up the warning letter I received from some government agency or another (can’t remember which) about proper handling of hazardous waste… never had a garbageman report me to authorities before, either. Don’t ask how much of that crap I may have breathed in at the time… I don’t know. Fortunately, it was a small bathroom, only 5×6 feet of flooring (five or six layers thick) was removed…
Anyway back to the kitchen floor. I did get lucky, as the buckling ended at the plywood layer. The 1960s and below layer weren’t buckled; I would only need to deal with this one area of buckled plywood. Unfortunately, there was no way to just screw the floor down where it was buckled, hoping to suck it down to the subfloor and level it out. This wasn’t something that I could just ignore, either, because every time I open the pantry door, it rubs the floor there and almost gets stuck. No way to add my layer of flooring and still open the door! Plus the pantry will be (is now) a high traffic area, so this particular buckle is noticeable, very noticeable.
Fortunately, I happen to own more power tools than most men. A fact that has both weirdly excited and deeply disturbed more than one
boyfriend over the years. Pulled out the handy-dandy RotoZip, cut just the plywood layer out, limiting myself to just the area that was buckled. Placed a few decking screws here and there to reduce the lesser buckling in the area, and went to grab the bucket of self-leveling cement that I know I have out in the Garage of Doom to fill in the hole I just created so the floor isn’t 1/4″ lower there.
Damn it, the stuff has dried rock-solid… that bucket’s been in the garage for at least six years!! It shouldn’t have dried out!
Grrr… let’s try some thinset mortar. If it’s good enough for ceramic tiles, it should be good enough to level out this hole… nope. It has dried solid, too, and it’s only 8 or 9 years old! Starting to regret the decision to try to get everything done using only stuff I already have on hand… *sigh*…
Well, I could use spackling paste… nah, that’s not a good idea Not only would it take a week or longer for a 1/4″ thick layer of
spackling paste to dry, it’ll crack and crumble under repeated foot traffic.
All done - beautiful!
Ahh hah! The Garage of Doom does contain a solution – silicon caulking!! Fortunately, I’ve got tubes of the stuff – I stocked up a few years ago when some home improvement store or another went out of business, got it for like 50 cents a tube! (Pack Rat Alert!) Of courses I can’t find the dang caulking gun, I own three of them (don’t ask) and can’t find a single one… but no worries. It’s not like I’m needing this to be a nice, fine, line. I just tore open the tube and used a putty knife to spread it out, reminding myself it doesn’t need to be perfect, just needs to be good. (I may not have inherited my mother’s neatness, but I sure did inherit her perfectionism! *grins*) Caulking is flexible and waterproof, so it’ll do the trick perfectly. Some bleach on the patches of mold (fortunately, dried and dead mold) that I exposed, and let it all dry overnight.
Well, actually, as it turns out, it took about three days for the silicon to completely set and dry.
After the silicon dried, I put down the rest of the stick-on floor tile, actually have enough left over that I could retile the floor in the pantry.
I think I’ll stew on that for a while… if I cover the pantry floor, there will be NO extra tiles left for future repairs, should any be needed. I think I’ll leave it as a future owner option to use that spare tile for the pantry or not.
The kitchen is almost done. I just need to clean up the mess I made doing all this work, clean the ceiling, move the table and chairs in, and it’s all done and ready to go. Probably hang some sort of picture on the wall above the table, it’s kinda stark looking there. It is so decluttered, it actually ECHOs in here!
wall and floor repaired and covered, ready for table
Posted in Life, Selling the House by Laura -
More articles about Remodeling the House
Thursday, 6. August 2009
I’m approaching the kitchen one wall at a time. Yesterday was the backsplash wall, today is the oven wall… meaning, the wall where the oven and my half-size dishwasher are. Also known as the Orange wall
I’m also rearranging the appliances, to make room for a table so my kitchen can be a proper “eat-in” kitchen. It always was meant to be, but I never eat in the kitchen, I eat on the couch watching TV like most Americans do! So years ago, I moved the fridge to the pantry wall, installed additional cabinets, tons of shelving, and added a half-size dishwasher. I now have to basically undo everything I did eight-ten years ago, so the kitchen will show better.
Orange wall before
Besides, it’s cluttered as all hell. Honestly, it’s not quite as bad as this photo shows… well, not normally… anyway, I pulled the dishwasher and oven out, and finished laying the floor under where the oven was, a reflooring project I started using 12 inch square stick-on floor tiles but never finished. I also had to replace two floor tiles by the door that had torn up.
Orange Wall in Progress
Took shelves down, patched holes, resurfaced the wall next to the oven where the tiles had fallen down some years ago…what a BITCH that was!! Ended up having to sand it down and layer it back up with spackling paste in like 20 very thin layers!
Washed the wall That orange is brighter now, yes indeedy!
Any ideas on how to clean a ceiling? Mine is, no joke, dusty!! And of course, it being a kitchen, much dusty-steam has settled on the
ceiling. Really don’t want to repaint it… although I probably should consider repainting the ceiling solid white *sigh*
Got the fridge pulled away from wall and ready to move into place.
Unfortunately, I couldn’t leave the shelves up above the stove like I originally planned… seems my fridge is a bit wider than the original fridge,
and, in fact, wider than I realized… only way to keep the shelves was to move the bracket over about 8 inches towards the cabinets…and
then the door to the cabinet would bump into the edge of the shelves!! Sure, could move the right side bracket, then cut the shelves to fit,
but screw it, too much work Keep it open looking this way… hang some picture above the stove, or a big fun 50’s-60’s style clock (no
doubt I can find something funky at goodwill) over the oven.
Besides, turns out the shelves were too high for the microwave, I couldn’t reach it once on the shelf, not being freakishly tall or anything
Orange Wall Done
The silver with the orange and the black trim really pops, don’t you think?
Posted in Life, Selling the House by Laura -
More articles about Remodeling the House
Wednesday, 5. August 2009
So there I was in Home Depot, looking at paints, I wanted to find some more of the primer I used on the kitchen countertop, so I could paint
the kitchen tile, make it look better. It’s pretty grungy green, after all, not to mention there’s holes where the insulation was blown
in, mis-matched tiles, cracked tiles, even missing tiles. I found a box of those god-awful plastic 1950s tiles in the basement, but they
were the frosted green that was originally used in the bathroom, not the matte lime-ish green that was used in the kitchen. I did use them anyway to replace the missing tiles and the tiles that had been drilled through when the insulation was done, plus some of the cracked ones. Of
course, it doesn’t match… but still, was better than nothing.
Still, got to thinking, someone walking in considering buying the house, wouldn’t like to see mismatched kitchen tiles… after all, we
DO spend a lot of time in the kitchen!
Kitchen wall after repair, before cover
Anyway, the primer product specifically designed to be used on formica, ceramic tile, and other super-smooth surfaces, is still being
manufactured. Unfortunately, of course, it’s gone drastically up in price since I bought it oh, nearly 10 years ago! $26 for a single
quart!! Which would be enough – just barely – but I also need to buy paint, and then the sealer to use after painting, and of course, the sealer spray is $16.95 a can, and I know I would need at least 3 cans, having used the stuff on the countertop before… and of course, a roll of painter’s tape at $3.96. Plus paint…I’m looking at $75 or more just to make the tile look somewhat better in the kitchen!
Sigh.
Kitchen backsplash in progress
I asked if they still sell stick-on cover-up tiles… these are aluminum squares painted different colors, or just brushed aluminum.
I’ve seen them before on DIY channel… you use 2-way tape to stick them on. Not elegant, but would look better. I remember looking at
them before, almost bought them before actually. But apparently they are no longer manufacturered. However, they could special-order me a new product called “Smart Tile” – it’s a vinyl/gell-like tile that also uses two-way tape or construction glue. And it’s thicker, about 1/8″, so it’ll hide cracks and stuff. He showed me this brochure,
asked how much, and he said $9.95 a box. I was like SOLD!! They look fantastic, and had all kinds of different styles! Could order them and be here within 3 days! I then asked him how many boxes do I need to cover about 24 square feet… I’m figuring probably two or three, since most ceramic tile comes in 10 or 12 square foot boxes. He then
tells me I would need TWENTY FOUR BOXES. WHAT?!? That’s over $230!!! Apparently they come in a box of FOUR
TILES. Just four! You gotta be kidding me!! I could retile the entire area with ceramic or some of those cool new glass tiles for less than $75!! Sure, it’d be a major friggin hassle, requiring some major demolition pulling all the old tiles off, ripping out the sheetrock and replacing it with wonderboard substrate, got plenty of mortar and grout left over from the bathroom… it’d only take me oh, 2 or 3 weeks… but it could be done. Thanks, but no thanks.
kitchen backsplash done
So off I go, wandering around home depot, just browsing, kinda getting a little stressed and a lot bummed out. I really do NOT want to show the kitchen looking the way it does, the kitchen is SO important when showing a house. Figured I’d go home and check online for something, some sort of idea.
And then I came across the perfect idea. Sitting right there on the shelf, just staring at me, calling my name, “Here is the answer, look here at me!”
Contact paper.
Not just any contact paper, but METALLIC contact paper. In brushed stainless steel. $9.95 a 24-square-foot roll. And EXACTLY
one roll left.
Glory Be!
Contact paper. Wonderful, fully-washable, fully-water-proof, super-thin so no need to replace the countertop trim edge or wall
edging, inexpensive, practically indestructible contact paper.
So off I went to the cashier hugging that precious roll of metallic brushed stainless steel contact paper, gleefully checked out, got
home, and attacked the kitchen.
Fortunately, I happen to have plenty of TSP (a very weak acid-wash solution), which is perfect for cleaning the grunge off the tile and
smoothing out the surface just a wee bit. Even though it is more work, I cut the contact paper into tile-sized squares, so I can better conform to the texture of the tile (plus makes it easier if a piece needs to be replaced).
well, I still must clean the countertop
I must admit I was a bit nervous when I put the first few squares on… wasn’t sure how it would look, I’ve always wanted to replace the
tile with stainless steal to keep in that 1950s “Diner” look and feel of the kitchen. But the nerves were unnecessary. I really like the way it looks. It went on super-easy, and although there are a few rough patches because the tile beneath is dinged here and there, it just actually adds to the character. I’ll have to buy another roll next time I go to town, as one roll wasn’t quite enough.
I really like the way it looks
Posted in Life, Selling the House by Laura -
More articles about Remodeling the House
